Vandens aušintuvas CWFL-500

S&A CWFL-500 Dual Temperature Water Chiller for 500W Fiber laser Cutting Machine

S&A CWFL-500 dual temperature water chillers specially designed for cooling 500W fiber lasers. The laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost & space.

Features:

• 1800W cooling capacity; use environmental refrigerant
• ±3degree precise temperature control
• Intelligent control mode
• Multiple alarm functions: compressor time-delay protection, compressor over current protection, water flow alarm and over high/low temp alarm
• Multiple power specifications, CE, RoHS and reach approva
• Optional heater and water filter

Notes

The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V.

Maintenance

> To ensure good heat dissipating, please open the lid to clean monthly.
> water type: recommend purified water or clean distilled water.
> The circulating water should be exchanged every 3 months.
> Users in low temperature(< 0) area should add noncorrosive antifreeze water.